UFM P420 SERIES DESCRIPTION
The P420 flowmeters are simple plastic flow transmitters
intended to be economical and robust.
• Port sizes available from 0.5″ to 2″ pipe size
• Flow rates are from 12 – 200 GPM with 10:1 turndown
• Wetted parts are PVC and CPVC, no moving parts
• Connections are socket weld ports or NPT threads
• Terminal strip with 1/2 inch NPT conduit port
• ID within .030 inches of standard Sch 80 PVC pipe
ELECTRICAL SPECIFICATIONS
• Output is a 4-20 mA
• Two wire loop powered
• Input power 10-30 VDC @ 25 ma
MATERIAL SPECIFICATIONS
• PVC or CPVC bodies, sensor and bluff
• No seals
INSTALLATION
• Straight run of 10 p.d. up & 5 p.d. down required
• 10 PSI backpressure required
INSTRUMENT SPECIFICATIONS
• Response time 0.9 seconds
• Accuracy ±2% of full scale (max fl ow)
• Repeatability ±0.25% of indicated fl ow
• Pressure maximums vary with pipe size & temperature
• Enclosure Type 4, IP 65
• Pipe connections solvent weld to socket or NPT
Download or View Below Product Literature :
1. P420 Plastic Vortex Shedding Flow Rate Transmitters
2. P420MAN Plastic Vortex Shedding Flow Rate Flowmeters
