The new NexGen SFT200 mass flow transmitter provides a small, efficient, low-cost control system for Itron mass flow transducers. The NexGen SFT200 greatly reduces the overall cost of the metering system in situations where the full capabilities of the Nexgen SFT100 are not required, for example, a Modbus environment where multiple meters are monitored by a central processor.
The NexGen SFT200 output is MODBUS protocol via RS-485, communicating at standard speeds up to 56.6 K baud. Pulse output is also available. All other functions are handled by external monitoring and control software applications.
The transmitter performs the basic functions of controlling and monitoring the mass flow transducer to determine the mass flow rate, the mass total, density, and temperature. From these primary measurements, it calculates the volumetric flow rate and volumetric total.
The transmitter can be configured through a PC with the Itron NexLink software. Optional interface devices can provide ancillary functions and calculations such as batch control functions, net oil/net water measurements, or other functions.
The Nexgen SFT200 can be mounted directly to the case of the transducer, or remotely mounted when operating conditions are not conducive to integral mounting. Field connections to the unit are made through an 8 position terminal strip with 14 – 18 AWG wires. The wiring cable is run through the unit’s connector and secured with a cable gland or conduit. Remote mounting requires an additional cable between the NexGen SFT200 and the transducer adapter.
Itron mass flow transducers are industry leaders in accuracy and reliability. The NexGen SFT200 delivers these benefits at a lower cost for Modbus applications.

Flowmeter Repair & Calibration
Industrial Dynamics Co (Exton, PA repair facility) provides repair service for almost all makes of liquid positive displacement flowmeters and mechanical registers.
We also provide NIST Certified flowmeter calibration service for ISO Compliance.

Custom Batch Control
Since 1984, we have been designing and supplying custom automated batch control systems for a wide range of applications within the food processing, chemical mixing, and many other industries.
Systems can range from very basic mechanical or electronic single station control, to the coordination of various simultaneous batching processes utilizing independent controls, or by means of central logic control technologies.
With our wide range of flow measurement, valving,  and control devices, coupled with our technical expertise, we can assure that the customer is provided with the proper equipment at the most economical price to satisfy system requirements.
We assemble control panels in-house, thereby providing the highest quality at a fair cost to best serve our customer.

Blending Control Systems
Since 1984,we have designed and provided custom automated blending control systems for the chemical, food, beverage, and pharmaceutical industries to produce a new product from a proportional combination of ingredients.
Applications have included pH control, color additive, recipe formulation, etc.
Our wide range of flow measurement equipment, sensing devices, and user friendly control equipment,  along with our many years of application experience, will result in high accuracy and maximized production efficiency for our customer.

Tank Level
Our product lines include level control and sensing equipment … tuning fork switches, ultrasonic , radar, and microwave level transmitters to simply provide on-off control, or to provide complete closed loop programmed level control systems.
We can communicate liquid level information to remote and local computers connected to both a wide area network (WAN), and to a local area network (LAN).
We can provide intelligent integrated system features such as the user friendly ability to simultaneously support various process & monitoring operations.
The customer can easily select Monitor, Manual, Batch, Dose, and PID from a common front panel keypad, or as provided by serial command from a local or remote computing system.

Precision Dosing Control
Serving many applications including municipal & plant water treatment, assuring customer compliance with sewer authority guidelines, we can provide a single source solution to applications demanding precise dosing control. We can also provide onboard data logging, real time clock, keypad security, LWAN communication, reporting firmware, etc all from an easy to operate single loop controller.

Boiler Feed Measurement and Control
We offer extremely accurate very low flow rate meters along with electronic display and recording equipment to provide net fuel useage and precise flow rate control for plant boiler fuel systems.

Custody Transfer Systems
We can provide complete custody transfer systems to suit just about any liquid transfer application.
Depending upon the product being dispensed, and your individual system needs, we can offer the appropriate measuring device and documentation capabilities to suit. This could be as simple as a positive displacement (weights & Measures approved) mechanical flowmeter with a mechanically printed ”delivery ticket” …. or, at the other extreme, we could provide a system to include a mass flow meter with temperature and/or density compensation to comply with weights & measures guidelines.
We can provide for extremely accurate daily tracking of product from the storage tank to various delivery points with daily transaction data, driver record, billing information, etc … wirelessly transmitted to your office based computer.

6014 Series Assemblies
Plug and play, pre-assembled and tested manifold solutions featuring our direct acting 3/2 way normally closed solenoid valve. The valves are plunger operated and designed to work in process environments with double FKM seals and a strong 32mm coil. These small flexible systems are engineered specifically for process compressed air. However Burkert specializes in custom manifolds to suit any fluid purpose from 0.05mm to 4”.

5470 Series Assemblies
Type 5470 includes high switch reliable diaphragm seat valves as 3/2 and 4/2 way version. The valve consists of three modules, valve body with servo-diaphragm, plungers and seat seal as well as numerous connection possibilities for the service ports 2 and 4. The body and valve internal parts are made of high quality thermoplastic, the Stainless return spring. A 16 mm rocker solenoid valve type 6106 with rectifier is used as pilot. Tag connectors are used as electrical contact (acc. DIN 43 650 Form C) with the cable plug type 2506 or with female connectors on the available valve blocks. The extendable type 5470 can be used for block modules (tag  connectors in front) or for entire valve blocks (tag connectors at the back, coil spacing 19 mm).

8640 Series Assemblies
The 8640 valve unit system is designed to solve diverse and complex control problems due to its systematic modular construction and combination of pneumatic and electrical interfaces. By putting together a row of pneumatic modules with different numbers of valves, 2 to 24 valve functionalities may be realized on one valve unit.
Electrical connectivity is achieved by either fieldbus interfaces, common connection (parallel connection technique) or multipole interfaces. The valves allow different applications to be covered. Bodies and connection modules are made of high-quality plastic (polyamide) and are easy to assemble by means of the built-in snap connectors

Burkert HazEx Valves
Burkert’s worldwide certifications allow North American engineers to employ
global HazEx™ standards on every project.
With certifications for FM, CSA and EEx (ATEX) Burkert can build a valve for your toughest application.
Modularity allows Burkert to stock what you need, where you need it.
Add in a perfect range of intrinsically safe valve technology and you have all the control strategies for HazEx™ locations.
These data sheets show only a small example of the complete range.